Drain Line Heater Wire - 12' Length - 230VAC - 40 Watt
- Use with a 3/4" thick copper pipe with an approximate length of 6'. Wire can melt PVC.
- Make sure drain pipe is sloped for proper drainage.
- Coil around outside of drain line and insulate with Armaflex pipe insulation.
- Use heat tape to secure the wire and insure that it doesn't come into contact with itself at any point (to prevent burnout).
If you need more than 3 heater wires, call us at 866-261-2797.
Certifications: NSF, UL